MERLYN Touchstone Rectangular Shower Tray (corner waste hole - 26 sizes available)

The foundation of a great shower starts underfoot. Merlyn's Touchstone Rectangular Shower Tray is expertly sculpted with a smooth, contoured surface that channels water efficiently while feeling solid and secure beneath your feet. Available in 26 sizes, it's the versatile, premium-quality base that fits virtually any bathroom layout.

Key Features

• 26 sizes available — from 800x700mm upwards, to suit any shower space
• Corner waste hole — discreet positioning for a clean, minimal look
• Chemical-resistant & anti-bacterial ultra-smooth surface — hygienic and easy to clean
• Built-in anti-slip coating — moulded into the surface so it won’t wear over time
• 50mm low-profile design — minimalist, contemporary look that sits flush with the floor
• Compatible with 90mm fast flow waste (sold separately) — for rapid drainage
• Waste options: Chrome, brushed brass, or black — coordinate with your fixtures
• UKCA & CE approved — meets UK and European safety standards
• Tray panel kits available — for a seamless, fully finished installation
• Free UK mainland delivery

Please note: All sizes in this range feature a corner waste hole.

Installation Guide

⚠️ Important: Check local building regulations — some areas require professional installation for plumbing work.

Tools Required: Spirit level (600mm min), adjustable spanner, screwdriver set, sanitary-grade silicone sealant, plumber’s putty or waste seal, adjustable feet/legs, tape measure.

1. Prepare floor — clean area, check level, mark tray position, ensure waste pipe is accessible at 65–100mm from finished floor.
2. Fit waste trap — attach to tray outlet before positioning; apply plumber’s putty, hand-tighten only.
3. Position & level tray — attach adjustable legs, position tray, adjust until perfectly level with a slight fall towards waste (1–2mm per metre).
4. Connect waste — connect trap to drainage pipe, test for leaks by pouring water down waste.
5. Seal edges — apply continuous bead of sanitary silicone around all wall edges, smooth with wet finger, allow 24 hours to cure.
6. Final checks — pour water into tray, check drainage and all seals.

Critical tips: Never install on an uneven floor (causes stress cracks). Minimum 50mm clearance below tray required. Standard waste diameter is 40mm.

Maintenance: Check silicone seals annually, clean waste trap every 6 months, use non-abrasive cleaners only.